How to get it done:
01. Select and Download the CONTROLLER:
We use the Tuya Smart App for this example. Or you can choose your own controller from here (ensure it is capable of achieving the desired automation).
02. Select the SENSOR:
- Type: Water leak sensor.
- We recommend a Zigbee water leak sensor for better connectivity and battery durability. However, a compatible WiFi sensor can still work.
- For a Zigbee water leak sensor, you need to have a Zigbee Bridge (hub/gateway) or buy it separately.
- In this example, we will use the Tuya Water Leak Sensor that is compatible with the Tuya Controller.
- You can browse different types of water leak sensors from here.
- Place the sensor near potential water leak sources (e.g., under sinks, near water heaters, in basements).
03. Automate using the controller app:
- Open the Tuya Smart app.
- Add the Zigbee Bridge first (if applicable): Ensure the Zigbee bridge power is on and in pairing mode.
- Click "Add Device" and you should be able to add the Zigbee bridge.
- Make sure the water leak sensor is in pairing mode and follow the same steps to add the sensor.
- Create a scene where the trigger device is the water leak sensor and the action is to send a notification.
- Click on "Smart" at the bottom of the app, then click on the "+" icon to create a new automation.
- Select the water leak sensor.
- Set the trigger as detecting water leakage.
- Set the action to send a notification.
- Save and test your automation.
Expected Time and Cost:
- Time: 10 minutes
- Cost: ~$30 (sensor and optional Zigbee bridge)
DIY Difficulty Level:
- Easy
